Model Number: JD14-1
Type: Diamond wire saw
Diameter:8.0mm – 11.5mm
Application:Quarrying, block squaring, profiling, Concrete
1.Drills-King Diamond Wire:
The steel wire works as a carrier for the beads and the rubber or plastic coating. For this we only use special high load open twisted wires, whose engineered structure ensures a perfect wire rotation with appropriate pre- twisting.
The beads equipped with a diamond mantle segment carry out the actual cutting work. The base of these beads is a cobalt alloy,which has already proved its performance on our segments for diamond circular saws. This base has been modified in order to achieve optimum free cutting and long life characteristics for the wire saw. Embedded into this metal alloy is a diamond quality, which was chosen specifically for the use on diamond wire due to its extreme fractural strength and high quality crystal structure.
The rubber or plastic coating protects the carrier wire from corrosion and from the grinding effect of the material to be sawn. It is also responsible for the fixed sit of the diamond beads on the wire.
The use of new developed plastics or elastomer and their subsequent treatment techniques guarantee the high resistance to aging,the necessary wear and abrasive resistance and the indispensible wire flexibility even under extreme conditions of application.
1.Very less breakage ratio when using therefore increase the working lifetime.
2.Automatic production ensures stable quality performance.
3.Safe, high efficiency and environment protecting.
2.Diamond Wire Saw For Quarry:
We recommend rubber wire,it can protect the wire saw rope very well and increase the wire’s strength.
The rubber has good temperature resistance, and it can be used when water is not enough.
Strong flexibility can reduce the cut-in-one-side problem.